A lot of people don’t know this, but you can actually raise your TV above a soundbar. It’s easy to do and will make the overall experience better for everyone in your living room.
The “how to raise tv above soundbar” is a quick and easy way to get your TV up higher than your soundbar.
We earn money from qualifying purchases made on our website as an Amazon Associate.
There are a few things you may do if your television is too near to the wall and your soundbar is too big. To make extra room for the soundbar underneath your TV, you might elevate it above it.
Not only will this prevent nesting (when wires contact and generate noise), but it will also improve the overall appearance of the arrangement. There are a few options for doing this.
You may use an AV mount and brackets to lift your TV above your soundbar by placing the soundbar on a center console and mounting the TV above it. You may also use bricks to lift the TV over the sopundbar if you don’t have the cash for it.
Continue reading to find out more. Check out this tutorial if you merely want to learn how to lift your TV a few inches.
1. AV Brackets, Anchors, and Mounts
Purchasing an AV mount is the first step.
This is by far the most convenient of the three options. These mounts are both simple to install and highly robust after they are installed if you buy a reliable brand.
They may be adjusted to bring your TV closer to the wall than usual, allowing space for your soundbar underneath it. Unless you have some extremely high-grade screws, mounting straight on drywall is not advised.
Whatever you connect these mounts to, they’ll give plenty of support. Because the back of your TV has just one point of contact, you must be cautious not to apply too much pressure or it may shatter.
The major benefit of utilizing a TV mount is that it eliminates some measuring concerns, such as accidentally spacing the TV mount studs too far apart.
2. Get drywall screws and anchors
This is a more permanent method of mounting your TV to the wall, giving you the assurance that it will not move. However, it does need drilling into your television.
You’ll also need anchors that are compatible with the screws. The benefit of this approach is that it is quite solid, so you won’t have to worry about your TV’s weight.
The disadvantage is that it takes a bit longer to put up, and you may have difficulty obtaining anchors that match the screws if they aren’t conventional sizes. When the holes don’t line up, you might try using washers instead.
3). Obtaining “L” brackets for drywall
This is a more permanent solution for mounting your TV on the wall, and it will be able to support a lot of weight.
The biggest disadvantage is that it necessitates drilling into your television. However, since the TV may simply be turned downwards, you may prefer this option (or upwards if you use two brackets).
2. Raise TV with Blocks
To get your television off the ground, you may do a few different ways. Using blocks or risers is one method.
Wood, plastic, and metal are some of the materials that may be used to make blocks. They come in a range of shapes and sizes, allowing you to choose the ideal set for your requirements.
How to Raise a Television Using Blocks
Step 1: Make sure the surface is completely flat.
Make sure the surface on which you’ll be mounting your television is flat. If it isn’t, level it out using a shim under one of the corners.
Step 2: Place four bricks under the TV Stand’s center.
Place four blocks under the middle of the TV stand, spaced evenly and facing straight upward.
The size of your blocks should be dictated by the amount of stability you need. This may vary based on the weight of your TV stand and the sort of flooring you have.
Step 3: Place more blocks below each corner of the TV stand.
Stack more blocks below each corner of the TV stand until just a little bit (about 1′′) of each corner is exposed. For stability, you may employ as much or as little block support as you require.
Just make sure that whatever you pick is robust enough to prevent anybody from being pushed off their feet. If the weight isn’t uniformly distributed from all four corners, putting too many blocks under a hefty TV stand might cause damage to the bottom.
Step 4: Place the television stand on top of the blocks.
Your television should be placed on the bottom of the four corner block stacks you just made. You may now be certain that nothing will fall or move. Of course, you should remain quite near to it in order to seize any remote controls.
What Is The Best Way To Raise A TV Stand?
You can lift your TV stand by following a few easy steps. This will assist to ensure that the screen is at the proper viewing height.
The steps are as follows:
1. Determine the height of your television stand. Look at your TV’s specs or measure it from the bottom of the stand to the top of the screen to find out. 2. Take this measurement and multiply it by 1.5. This will give you an idea of how high you should raise your TV stand. 3. Get some risers made of wood or metal that are this height or higher. 4. Mount your television on top of the risers and fasten them using screws or bolts. 5. Take pleasure in your newly elevated TV stand.
How to Raise a Television Without Using a Wall Mount
You can lift your TV without requiring a wall mount by following a few easy steps. You can keep your television steady and safe by following these instructions.
Step 1: Locate an appropriate viewing area for your television.
Make sure the surface is flat and level, with enough room for the television to sit comfortably.
Step 2: Put the TV stand together.
This varies based on the TV stand’s manufacturer, but it usually entails joining the legs to the base and then the top piece.
Step 3: Place the television on top.
Put the TV stand in the preferred area once it has been built, and then gently place the TV on top. Check that the TV is centered on the stand and that it is stable and level.
Step 4: Mount the television to the stand.
To mount the TV to the stand, use the provided screws or bolts. Tighten the screws until the television is securely in place.
Conclusion
You may lift your TV over the soundbar by following these easy steps. This will enable you to place your television in whatever spot you choose while also adding stability and security.
Watch This Video-
The “distance between tv and soundbar” is a question that has been asked many times. In this article, I will answer how to raise your TV above your Soundbar.
Frequently Asked Questions
How do I raise the height of my TV?
A: To raise the height of your TV, you will need to use a VESA mount. The mounts are made for certain brands and models with specific measurements that correspond with the model number on its back or bottom side. Once you have found one that fits your needs, simply attach it to the top of either corner of your TV using screws or bolts provided in its package.
Can you put a TV on top of a soundbar?
A: Generally, it is not recommended to put a TV on top of soundbar due to the issue with using HDMI cables.
How high should a TV be above a soundbar?
A: The height of the TV above a soundbar should be at least 30 inches.
Related Tags
- sound bar won’t fit under tv
- soundbar above or below tv
- need to raise tv 2 inches
- where to put soundbar on wall mounted tv
- sonos soundbar above or below tv